Skip to main content
China engineers behind J-35 fighter jet pioneer 3D-printed load-bearing structures in military aircraft

China engineers behind J-35 fighter jet pioneer 3D-printed load-bearing structures in military aircraft

Toms Hardware
17 lis 2026, 10:06Hardware
Oryginał
1 min read

Engineers from China’s Shenyang Aircraft Design and Research Institute have 3D-printed a primary load-bearing structure for military aircraft that measures over 16.4 feet in length.

The Shenyang Aircraft Design and Research Institute, a research organization under the Aviation Industry Corporation of China (AVIC), has successfully produced the large metal component. This primary load-bearing structure is designed for military aircraft applications and marks a significant milestone in the development of the J-35 fighter jet platform.

The component, reported by the Global Times, is over 16.4 feet (five meters) in length. It was created using segmented printing and fusion techniques to achieve the required size and strength for a critical aircraft part.

The institute has been working on 3D-printed aircraft components since 2003. The new part is the culmination of decades of research and development into various metal additive manufacturing techniques.

Z.ai
Article written by AI
Z.ai GLM-4.7-FlashFree
Free AI articles150 of 150
No limit after signing in with Telegram