
Radeon RX 9060 XT Owner Finds A Melted 8-Pin PCIe Connector Despite Using A $300 Corsair PSU And A Four-Year-Old Cable - Wccftech
A user on Reddit reported discovering a melted 8-pin PCIe power connector on their Radeon RX 9060 XT despite using a $300 Corsair PSU and a four-year-old cable.
Two new reports have surfaced detailing the rare but concerning issue of melted 8-pin PCIe power connectors, with one case involving a high-end graphics card and the other a budget model. The incidents, shared by Redditor u/JudicialMuscle and u/ThanksKooky118, have raised questions about the reliability of even premium power supplies and cables in preventing such failures.
Budget GPU Melt
The first case involved a GeForce RTX 5060 Ti 16 GB, which was powered by a single 8-pin PCIe cable from an Ant eSports 750W power supply. The user, u/JudicialMuscle, initially experienced no display on their monitor and, after troubleshooting with ChatGPT, discovered a badly burnt connector on both the GPU and the cable. While the Ant eSports brand is not widely popular among enthusiasts, another user suggested that the connector may not have been fully inserted into the GPU port, indicating that improper connection could be a contributing factor.
Premium PSU Failure
The second case, shared by u/ThanksKooky118, involved a Radeon RX 9060 XT that was powered by a $300 Corsair PSU and a four-year-old cable. Despite the use of a high-quality power supply, the user still encountered a melted 8-pin PCIe connector, with damage primarily on the cable side but some also on the GPU's connector. This incident underscores that even with top-tier components, users must ensure a proper connection to avoid potential damage.
Rare but Dangerous
Melting of 8-pin PCIe connectors remains incredibly rare, even though burning and melting of newer 12/16-pin connectors are more common. Both reported cases involved budget GPUs that consume between 160-180 W, but the potential for damage is not limited to high-performance cards. Users are advised to regularly check their power connectors for proper seating and to replace cables if signs of wear or damage are observed.

