Skip to main content
How Metal Foam Could Make Cars Safer

How Metal Foam Could Make Cars Safer

Hackaday
16 lis 2026, 18:01Hardware
Oryginał
2 min read

Researchers at NC State University have discovered that composite metal foams could significantly improve vehicle crash safety, potentially allowing cars to withstand impacts at speeds up to 48% higher before reaching critical injury limits.

The automotive industry has long prioritized making cars safer in collisions, with crumple zones designed to absorb impact energy while protecting passenger compartments. Now, researchers at NC State University are exploring whether metal foams could take vehicle safety to the next level by improving how cars absorb kinetic energy during crashes.

Metal Foam Technology

Composite metal foams (CMFs) consist of hollow metal spheres embedded in a metallic matrix, creating a lightweight structure that excels at absorbing compressive and impact forces. The study used a steel-based CMF with stainless-steel hollow spheres packed into a 316L stainless-steel matrix with 59% density, structured in a body-centered cubic lattice.

The foam's energy absorption comes from the cushioning effect of pressurized air within the hollow spheres, which burst under sufficient deformation. Researchers created computational models comparing CMF-filled front rail crash structures against conventional steel or aluminum designs in both double-octagon and rectangular cross-section configurations commonly used in modern vehicles.

Significant Safety Improvements

The simulation results revealed dramatic improvements in crash safety. For double-octagon rails, vehicles with CMF structures could withstand impacts at speeds 34% higher before reaching critical crash-severity limits, or 40% higher for head-injury limits. Rectangular rails showed even better performance, with 32% higher speeds for crash severity and 48% for head injury limits.

At 55 mph impacts, CMF rails of the same size and weight reduced maximum deceleration by 38%, crash severity by 45%, and likelihood of severe head injury by 45%. For rectangular rails, the improvements were even more striking: maximum deceleration decreased by 84%, crash severity by 94%, and head injury likelihood by 83%.

Path to Implementation

While these results are promising, the study was conducted through computational models using finite element analysis for composite metal foams. The next step involves real-world crash testing, which remains expensive and time-consuming.

Even if metal foams prove effective in physical tests, automakers will need to evaluate production costs. If the technology cannot be manufactured economically while vehicles already meet required safety standards, manufacturers may be reluctant to adopt it. For now, composite metal foams represent an intriguing area for further research that could potentially transform vehicle safety in the coming years.

Z.ai
Article written by AI
Z.ai GLM-4.5-FlashFree
Free AI articles150 of 150
No limit after signing in with Telegram