Skip to main content
Honeywell PTM7950 lowered the temperature Hotspot RTX 4090 30 °C - GameGPU

Honeywell PTM7950 lowered the temperature Hotspot RTX 4090 30 °C - GameGPU

NVIDIA GPUs
16 lis 2026, 13:42Hardware News
Oryginał
1 min read

A Reddit user successfully reduced his RTX 4090's hotspot temperature by 30°C after replacing faulty factory thermal paste with a Honeywell PTM7950 phase-change thermal pad.

The ASUS TUF Gaming GeForce RTX 4090 was experiencing critical hotspot temperatures reaching 113.3°C due to factory thermal paste being squeezed out from the AD102 crystal's surface. This pump-out effect created virtually nonexistent thermal interface in the upper left portion of the chip, causing the cooling system to work at maximum capacity with fans spinning at over 3200 RPM.

Temperature Reduction

After replacing the faulty interface with a Honeywell PTM7950 phase-change thermal pad, the hotspot temperature dropped dramatically to 83.1°C. The average GPU temperature decreased from 91.7°C to 72.2°C, allowing fan speeds to reduce to 61% (approximately 1924 RPM).

Performance Improvements

The thermal pad replacement not only improved temperatures but also enhanced performance. Frame rate stability in 3DMark Steel Nomad benchmarks increased from 98.5% to 99.4%, with the best pass score rising from 8123 to 8464 points. Power consumption increased slightly from 349W to 376.9W due to reduced cooling system speed.

Z.ai
Article written by AI
Z.ai GLM-4.5-FlashFree
Free AI articles150 of 150
No limit after signing in with Telegram