
Thermal Grizzly Details WireView Pro II Extended GPU Warranty Conditions - TechPowerUp
Thermal Grizzly has published an FAQ detailing the conditions for its WireView Pro II extended GPU warranty, covering cables, settings, adapters, and claims processing.
Thermal Grizzly has published an FAQ clarifying the conditions of its WireView Pro II extended GPU warranty, covering cables, settings, adapters, and claims. Neither the USB cable nor the motherboard Y-splitter needs to be connected for coverage, though monitoring must remain enabled.
The company allows third-party extensions between the WireView and GPU as long as each 12V line remains separate. Adapters that bridge these lines internally void coverage since they prevent the WireView from accurately reading current on each GPU power contact.
Coverage Details
The warranty covers damage to the 12VHPWR or 12V-2x6 connector and resulting GPU damage, but excludes unrelated faults, PSUs, or other parts. Shunt mods, XOC BIOS with raised power targets, and commercial mining are specifically excluded from coverage.
Coverage runs for 24 months from the WireView purchase, even after the GPU's own warranty ends, but only for the original buyer with proof of purchase.
Claims Process
Accepted claims begin with a repair attempt, and if unsuccessful, Thermal Grizzly provides a replacement card with comparable performance, though not necessarily the same brand or edition. Owners experiencing melting should power down, unplug the PSU, leave the connector attached, document with photos, and contact support before shipping.